Cayenne FSA Series Unit Heaters

Heater Natural Gas $738.00 23-7048 FSAP-75 Heater LP $741.86 SEP Series Technical Data Cayenne FSA Series Unit Heaters Available from the factory in natural or liquid propane gas, the units' easy-to-clean inshot burners, direct spark ignition, quiet fans, and dependable tubular heat exchangers provide trouble-free heating. All Cayenne unit heaters can be vented horizontally or vertically.


Cayenne FSA Series heaters use air from the heated space for combustion. A single pipe vents the flue gases to the outside. Item # Description Price ADP Natural Gas 23-7003 SEP 115A $886.68 23-7004 SEP 145A $954.48 23-7005 SEP 175A $1,023.04 23-7006 SEP 200A $1,061.56 23-7011 SEP 230A $1,331.18 23-7049 SEP 250A $1,446.74 23-7050 SEP 300A $1,509.90 23-7013 SEP 345A $1,637.01 23-7014 SEP 400A $1,733.31 ADP Propane 23-7018 SEP 115A $955.25 23-7019 SEP 145A $1,014.56 23-7020 SEP 175A $1,089.29 23-7021 SEP 200A $1,097.76 23-7022 SEP 230A $1,386.65 23-7055 SEP 250A $1,667.83 23-7052 SEP 300A $1,577.70 23-7024 SEP 345A $1,680.15 23-7025 SEP 400A $1,737.93 ADP | Heaters Prices and availability may vary by location.


Minimum quantities may apply. 54 EQUIPMENT State-of-the-art SEP Series Unit Heaters from ADP offer the first tubular heat exchanger in a unit heater. Available in aluminum or stainless steel.


Standard Vent Blower Air-Foil Turning Vane Design Self-Diagnostic Control Board Trouble-Free Inshot Burner Standard Direct Spark Ignition Longer Lasting Heat Exchanger BFG's Technical Services Division is your one-stop shop for answers, advice, and all the structures, equipment, and irrigation supplies you need! SEP Series Unit Heaters Heating capacity input: 60,000 to 400,000 BTUH Thermal efficiency: 80% Cayenne FSA Series Unit Heaters Heating capacity input: 30,000 to 75,000 BTUH More than 80% thermally efficient " " " " Heaters | ADP BURTON, OH 800-883-0234 " ADEL, IA 888-693-1473 " BATAVIA, IL 800-413-0924 " KANSAS CITY, KS 888-713-9009 " BELLEVILLE, MI 800-883-2234 " JENISON, MI 800-883-4234 " KALAMAZOO, MI 800-883-7234 MINNEAPOLIS, MN 800-798-2891 " LANCASTER, NY 800-883-3234 " PORTLAND, OH 800-843-2830 " XENIA, OH 800-883-5234 " HARMONY, PA 800-883-8234 " D e FOREST, WI 800-269-8816 55 www.bfgsupply.com EQUIPMENT ROOT ZONE HEATING & IRRIGATION " Saves energy up to 50% " Stimulates root density " Reduces your work load " Produces high quality crops Heat substrate without reducing moisture levels. Temperature intake (max) 140º F Pressure (max) 15 psi Flow rate 0.006 GPM/ ft 2 Heating tubes (int./ext.) 0.170 / 0.30 inches Energy consumption to heat pot substrate one degree over ambient air 2.32 BTU/hr/ft 2 /F degree (Ratings are for bottom insulated mats) Mat widths # of heating tubes (in & out) # of drip tapes 3 9 (0.91 m) / 4 9 (1.22 m) 8 / 12 2 / 2 5 9 (1.52 m) / 6 9 (1.83 m) 14 / 18 3 / 3 7 9 (2.13 m) / 8 9 (2.44 m) 20 / 24 4 / 4 11 9 (3.35 m) 32 6 Please call for custom pricing.


Soleno Textiles | Heaters Description Price AQUATHERMAT Prices starting at $2.56 per square foot. Prices and availability may vary by location. Minimum quantities may apply.


56 EQUIPMENT Sealed Combustion Boiler These units offer superior performance and serviceability in a high-efficiency, multi-stage boiler. The RBI Dominator offers optimum thermal delivery with low NOx levels, multiple firing options, and venting flexibility in a compact footprint. It is available in a range of capacities from 300,000 to 2,100,000 BTU to meet most applications.


Heating | Delta T Solutions Heating Tubes Delta Tube" SD This system provides the best growing environment for propagators, plug producers, and general growing. Healthy, more uniform plants plus at least 20% fuel savings make this system the grower's choice. Uses Delta T quality synthetic tubing that will not break down under ultra violet rays Durable Low Maintenance Low Volume Fast response Delta Tube" LD The Delta Tube" large diameter EPDM rubber tube in-ground heating system is ideal for larger ranges.


The system excels in the nursery industry and is very economical for starter houses because it can save you 20% or more over conventional forced air heating. Uses Delta T high quality synthetic tubing that will not break down under ultra violet rays. Durable Low Maintenance Low Volume Fast Response Delta Tube" HD The Delta Tube" HD is a high density polyethylene floor heating system that is an excellent choice for heating ware- houses, retail areas, potting areas, and greenhouses.


It installs easily and because the tubing is installed directly into concrete floor, it doesn 9t get in the way. Great for areas where run-off is a concern. Special manifolds are concealed in a 2 9 x 3 9 box in the floor.


No tubing is left exposed. Delta T also offers Delta Tube HDPEX tubing to meet the strict codes required in some areas. For systems where oxygen barrier is required, we offer the Delta Tube HDPEXOX.


" " " " " " " " Fin Heating Delta Fin" SF Delta Fin" multi fin is the grower 9s choice for uniform convection heating. It is constructed of aluminum to dissipate heat quickly, resulting in energy savings. The external surface of 100 lineal feet of Delta Fin" is approximately the same as 844 lineal feet of 2 d bare pipe.


This means it would take 844 feet of 2 d pipe to produce the same amount of heat as it would take 100 lineal feet of 2 d Delta Fin". Its high BTU output means you need fewer units. All fittings connect with a special all-aluminum coupler which requires no threading.


The unique fittings make it easy to install. Its simple design makes the Delta Fin" easy to maintain or replace parts. This system is for heating the greenhouse from the perimeter or running under the gutter for snow melting.


Ideal for cold spots and hard- to-heat areas. Lightweight (the weight of steel radiation) Low Water Volume High Efficiency Aluminum No Rusting Long Life Delta Fin" TF The Delta Fin" TF heating system heats the greenhouse from below the bench, allowing for maximum temperature control and accelerated plant growth. Proven effective by many of the largest plug growers in the industry.


The reduced BTUs per foot and added material result in even heat being transmitted to crops. Low Water Volume High Efficiency Aluminum No Rusting Long Life " " " " " " " " " Available in 2" and 1" with stock length of 12'. Please call for customized layouts and pricing.


BURTON, OH 800-883-0234 " ADEL, IA 888-693-1473 " BATAVIA, IL 800-413-0924 " KANSAS CITY, KS 888-713-9009 " BELLEVILLE, MI 800-883-2234 " JENISON, MI 800-883-4234 " KALAMAZOO, MI 800-883-7234 MINNEAPOLIS, MN 800-798-2891 " LANCASTER, NY 800-883-3234 " PORTLAND, OH 800-843-2830 " XENIA, OH 800-883-5234 " HARMONY, PA 800-883-8234 " D e FOREST, WI 800-269-8816 57 www.bfgsupply.com EQUIPMENT The PDP (propeller) and BDP (blower) High Efficiency II gas unit heaters are a generation of products that are inexpensive to install, easy to use, and offer excellent in-service economy. Each Modine power-exhausted unit heater has been engineered to include the following features: " A thermal efficiency of 80%, maximizing seasonal efficiency through the use of a collector box and the power exhaust. " A power exhaust that can be rotated 180 degrees.


The unit can be vented vertically or horizontally. " A 100% shut-off, intermittent pilot-ignition system with continuous retry at no extra charge. This ignition system allows for all PDP/BDP units to be field-converted to propane, if desired.


" A safety pressure switch to assure safe venting conditions. " Designed to utilize the smallest diameter vent pipe possible. " cWing d screws designed so the bottom pan can be dropped without a screwdriver or nut driver.


" PDP models are designed to operate against 0.5 inches of external static pressure " A level hanging mechanism for easy field adjustments after adding accessories that may change the unit 9s center of gravity. Model PDP Model BDP Power-Vented High Efficiency II Propeller (Standard) Heater PDP 150 PDP 175 PDP 200 PDP 250 PDP 300 PDP 350 PDP400 Btu./Hr. input 150,000 175,000 200,000 250,000 300,000 350,000 400,000 Btu./Hr.


output 120,000 140,000 160,000 200,000 240,000 280,000 320,000 Entering Air@ow (CFM) 2,180 2,550 2,870 3,700 4,460 4,870 5,440 Max mt. height (ft) 16 17 15 19 21 20 19 Heat throw (ft) 55 59 51 67 74 70 69 PRICE $791.43 $889.41 $1,014.30 $1,109.52 $1,322.73 $1,547.67 $1,660.83 Blower (Standard) Heater BDP 150 BDP 175 BDP 200 BDP 250 BDP 300 BDP 350 BDP 400 Btu./Hr. input 150,000 175,000 200,000 250,000 300,000 350,000 400,000 Btu./Hr.


output 120,000 140,000 160,000 200,000 240,000 280,000 320,000 Air Flow CFM Range 1587-2778 1852-3241 2116-3704 2646-4630 3175-5556 3704-6481 4233-7407 Air Temp. Rise Range (°F) 40-70 40-70 40-70 40-70 40-70 40-70 40-70 PRICE $1,867.14 $2,045.85 $2,170.74 $2,548.86 $2,847.63 $3,096.72 $3,530.73 Hot Dawg Heaters Heater HD30 Nat. HD30 LP HD45 Nat.


HD45 LP HD60 Nat. HD60 LP HD75 Nat. HD75 LP Item # 23-0992 C02630 23-0995 23-0994 C02660 C02670 23-0996 23-0997 Btu/Hr.


input 30,000 30,000 45,000 45,000 60,000 60,000 75,000 75,000 Btu/Hr. output 24,000 24,000 36,000 36,000 48,000 48,000 60,000 60,000 Heat throw (ft) 25 25 27 27 36 36 38 38 PRICE $539.00 $539.00 $559.60 $559.60 $573.39 $573.39 $610.65 $610.65 Model BDP Model BDP Hot Dawg Heater Hot Dawg Heaters Hot Dawg heaters are small, efficient, and economical heaters that can be used in parkign lot houses, potting rooms, garages, and even warehouses. Modine | Heaters Prices and availability may vary by location.


Minimum quantities may apply. 58 EQUIPMENT When faced with difficult applications, Modine separated- combustion, high-efficiency unit heaters are the better choice. These unit heaters are specifically designed for hostile atmospheric conditions, such as chemicals, high humidity or negative pressures encountered in greenhouses.


Combustion air is brought in from outside the heated area, either from outdoor air or from an adjacent room. This eliminates the need to use indoor air for combustion. Like all Modine gas-fired unit heaters, these heaters feature efficient air-foil heat-exchanger tubes and effective heat transfer surfaces designed to maximize heat-transfer from the burned fuel to the air passing over the heat exchanger.


Modine 9s unique design also minimizes resistive losses, resulting in greater heat throw and lower motor horsepower requirements. Modine employs a non-condensing recuperative heat- exchanger design to reclaim additional flue-gas heat prior to expelling the gases from the building. This is accomplished by collecting the flue gases and passing them twice through the secondary heat-exchanger tubes.


Features: " 80% Seasonal efficiency " 82% Thermal efficiency " Horizontal or vertical venting " 20%+ fuel savings versus gravity vented products " 100% outside air for combustion " Stainless steel secondary heat exchanger tubes " Sealed compartment protects combination gas control, ignition control, manifold and burner Separated - Combustion High Efficiency Propeller (Standard) Heater PSH 150 PSH 170 PSH 225 PSH 280 PSH 340 Btu./Hr. input 150,000 170,000 225,000 280,000 340,000 Btu./Hr. output 123,000 139,000 184,500 229,600 275,400 CFM (at 70ºF) 2,900 2,900 4,275 4,400 5,300 Max mount.


height (ft) 16 16 20 20 20 Heat throw (ft) 50 50 65 65 65 PRICE $1,526.28 $1,575.96 $2,007.21 $2,134.17 $2,400.51 Blower (Standard) Heater BSH 150 BSH 170 BSH 225 BSH 280 BSH 340 Btu./Hr. input 150,000 170,000 225,000 280,000 340,000 Btu./Hr. output 123,000 139,400 184,500 229,600 275,400 Air Flow (CFM Range) 1340-2071 1591-2347 1985-3068 2501-3865 3000-4636 PRICE $2,428.80 $2,552.31 $2,877.30 $3,479.67 $3,914.37 Model PSH Model BSH BFG's Technical Services Division is your one-stop shop for answers, advice, and all the structures, equi